To maximize foliar uptake:
1. Mix with a wetting agent (e.g.
TopWet). This enhances surface penetration and
coverage.
2. Use a spray device that produces
spray droplets that are as small as possible.
3. Spray when there is minimal light
and maximum humidity. This will also help prevent leaf burn and staining.
4. Lightly spray both sides of leaves
and stems until just wet.
-
If spraying at night, spray no earlier than 1 hour before daylight
commencing. This will help reduce the risk of mould.
- To
reduce the risk of leaf staining use low salinity/ soft water.
-
Test compatibility before spraying entire crop i.e. Test-spray a small
patch of leaves for at least 2 weeks.
